Matek PDB-XT60 Power Distribution Board for X or H Design FPV Racing
$4.62
1
Item sold in last 48 hours
In stock
7
People watching this product now!
Description
Description
- The Matek PDB board has been engineered to provide the highest possible performance and reliability in a 36*50mm & 4 layers PCB.
- It distributes power from a LiPo pack to 6 ESCs, as well as providing synchronized regulated DC 5V outputs linear regulated DC 12V for powering Cameras, Servos, RC receiver, Flight Controllers, Video Transmitters, LEDs, etc.
- The PDB-XT60 offers an Authentic Amass XT60 plug to connect the LiPo pack conveniently.
- 4-layer PCB Board, high current power, and BEC stratification avoid ground disturbance BEC power current.
- This PDB board makes the wiring nice, with the bonus of having the XT60 option. Stacked right on top of the CC3D with plenty of room. Total 6 pairs ESC solder tabs are fit for H or X type frame mounting hole suit for CC3D naze32 F4 F3 flight controller.
DOWNLOAD
MANUAL: http://www.mateksys.com/downloads/PDB-XT60_Manual_EN.pdf
General
- Input voltage range (3S-4S LiPo operation): 9 – 18V DC
- Regulated 5V and 12V outputs
- LED power indicators ( 5V and amp; 12V outputs )
- 6 ESC outputs and amp; 1 pair VCC/GND pads
ESC outputs
- Continuous current: 25A*4 or 15A*6
- Peak current (10 seconds/minute): 30A*4 or 20A*6
BEC 5V output
- Designed for RC Receivers, Flight controllers, OSD, and Servos.
- DC/DC synchronous buck regulator.
- Voltage: 5.0 +/- 0.1VDC
- Continuous current: 2 Amps (Max.2.5A 10s/minute)
- Output Ripple: 40mV (VIn=16V, VOut=5V2A load)
- Short-circuit tolerant (5 seconds/minute)
BEC 12V output
- Designed for Video TX or FPV camera with linear regulator.
- The battery should be 4S LiPo (1318V DC)
- Voltage: 12.0 +/- 0.3VDC
- Continuous current: 500mA (Max.0.8A 5s/minute)
- Short-circuit tolerant (2 seconds/minute)
BEC 12V 3S LiPo
- Output voltage= 3S LiPo voltage -1V
Physical:
- Dimensions: 36 x 50 x 4 mm (without XT60)
- Mounting: 30.5 x 30.5mm, Φ3mm
- Weight: 7.5g(without XT60), 11g(with XT60)
Package Including
- 1 x Matek XT60 PDB
- 1 x XT60
Additional information
| Weight | 0.05 kg |
|---|
Reviews (0)
Shipping & Delivery
Related products
Select options
This product has multiple variants. The options may be chosen on the product page
iFlight Anti Spark Filter
$13.99
Select options
This product has multiple variants. The options may be chosen on the product page
Reviews
There are no reviews yet.