The Diatone Mamba MK4 Mini is an F722 Flight Controller with an ICM42688P Gyro, making this FC the perfect addition to your FPV build.
MK4 UPDATES
- Upgraded the twisted pair anti-jamming cable, and the reinforcement process
- MINI series upgraded DJI interface and 5V 15W/9V 18W 2 set BEC
- Miniseries FC use 2mm and 3mm fixing holes
- The entire series supports 6 set uart and |2C
- A full range of integrated Flash and Baro
- MP9943 synchronous rectifier BEC
- The pad area increased by 30%
- Pad spacing increased by 100%
- The whole series uses Type-C
- 32Bit ESC all support 128K
- 4set power protection
FEATURES
- 16M Flash Memory Blackbox
- 20x20mm Mounting Pattern
- 3~6S Lipo (12.6~25.2V) Input
- ICM42688P GYRO
- 6 Uarts
- Buzzer
- OSD
SPECIFICATIONS
- GYRO Version A: Gyro ICM42688P
- Mounting: 20.0×20.0mm,M3/M2
- Receiver: TBS/SBUS/IBUS/DSM
- Receiver Protection: Yes
- Blackbox: 16M Memory
- Size: 29.0×29.5×6.5mm
- Frequency: 216MHz
- Software: Betaflight
- BEC Protection: Yes
- TVS Protection: Yes
- AIR UNIT Port: Yes
- MCU: STM32F722
- ESC Signal: 8 Set
- VTX Switch: Yes
- Buzzer Pad: Yes
- Barometer: Yes
- OSD: AT7456E
- CURR Pad: Yes
- BEC 3.3V: 0.5A
- Input: 6S Lipo
- BEC 5V: 2.5A
- Weight: 6g
- Uarts: 6 Set
- BEC 9V: 2A
- BF LED: Yes
- F.Port: Yes
- 12C: Yes
PACKAGE INCLUDES
- 1x Diatone Mamba MK4 F722 Mini Flight Controller
- 5x M3 ESC Isolation Dampers
- 5x M2 ESC Isolation Dampers
- 5x M3 Silicone Dampers
- 5x M2 Silicone Dampers
- 1x 6-Pin Air Unit Cable
- 2x 8-Pin Cable
Reviews
There are no reviews yet.