Cetus X Brushless Quadcopter

Bullet Point

• An excellent preference for beginners to get advanced level. Cetus X brushless Quadcopter is proud of its lightning speed with rapid startup due to its stronger propulsion system.
• Build-in ExpressLRS 2.4G receiver that is the most popular radio link, low latency, and far controlling range are possible. Pilots can not only enjoy the flight indoors but also explore the scenery outdoors. The drone with Frsky receiver protocol version is also provided for customers who used to have LiteRadio 2 SE radio transmitter in Cetus Pro or Cetus RTF Kit.
• Featuring M04 400mW VTX, C04 FPV camera (based on Caddx Nano Ant Camera or Runcam Nano 4), and 2*BT2.0 450mAh 1S 30C battery for longer radio and video transmission and flight endurance, Cetus X brushless quadcopter allows beginners to gain more achievements in FPV flight.
• Flying a drone expertly is the first step to being a drone master and the next is to set up. With the support of Betaflight configurator, beginners are able to learn flight controller settings, which is an essential way to get drone experience.
• Classical white design inherited from Cetus Series and made of PA12 material, Cetus X frame has an excellent impact resistance in drop & impact. The 360° protection of the whoop frame ensures safe flights both indoors and outdoors. Meanwhile, the FPV camera supports 0°-40° adjustable degrees, which provides different views for pilots.

Specification

• Item: Cetus X Brushless Quadcopter
• Weight: 55g
• Wheelbase: 95mm
• FC: F4 1S 12A FC (Betaflight)
• Motors: 1103 11000KV Motor
• Props: Gemfan 2020 4-Blades Props
• Camera: C04 FPV Camera (Caddx Nano Ant Camera/Runcam Nano 4)
• Camera Adjustable Angle: 0°-40°
• Frame: Cetus X Brushless Whoop Frame
• Receiver Protocol: ELRS 2.4G
• VTX: M04 25-400mW VTX
• Battery: 2*BT2.0 450mAh 1S 30C Battery
• Flight time: 5 mins

ExpressLRS 2.4G or Frsky D8

Equipped with F4 1-2S 12A flight controller, Cetus X brushless quadcopter supports ELRS 2.4G or Frsky D8 RX protocol. Both RX versions support the Betaflight configurator and have great performance in maneuverability, power, and flight time. Pilots who had Cetus Pro or Cetus RTF Kit can continue to use LiteRadio 2 SE radio transmitter to fly Cetus X Frsky D8 version.

Improved Video Transmission

Cetus X Brushless Quadcopter comes with M04 25-400mW VTX and C04 FPV camera. M04 25-400mW VTX features a lightweight and adjustable output power for longer distance flying. Combining this VTX and the excellent radio link ExpressLRS 2.4G, pilots can fly whoop drones longer to explore more possibilities and fun. In addition, C04 FPV camera (based on Caddx Nano Ant Camera/Runcam Nano 4) shows a better quality in FPV flight compared with C02 FPV camera.

Powerful Propulsion System

Equipped with 1103 11000KV Brushless Motor and Gemfan 2020 4-blade props. 1103 motors are designed for 2S quadcopters with incredible power, smooth and quiet operation, and light enough. Besides, Cetus X quadcopter adopts 2020 4-blade props, which are lighter and durable enough, offering pilots a high-efficiency flight experience.

Primary Choice for Next Level

Cetus X Brushless Qaducopter Betaflight FC version supports configuring on Betaflight configurator. It is a primary choice for beginners who start to learn drone configuring, which helps beginners to get advanced level. With the Betaflight configurator, you can calibrate accelerometer, custom OSD content, adjust the video transmitter and etc.

Betaflight Flight Controller

Cetus X brushless quadcopter is built-in F4 1S 12A FC board, supporting ELRS 2.4G, or default Frsky D8 protocol. The ELRS 2.4G version comes with betaflight 4.3.1 FC firmware so it supports ELRS V2.0. The Frsky version can be switched to the Futaba SFHSS protocol through the Betaflight configurator. The ESC on the new board powered by BB51 hardware comes with Bluejay 48k ESC firmware, allowing 1103 11000KV motors to give full play to the efficiency of power. We update the gyro to BOSH BMI270 for better performance and stability since the new F4 1-2S 12A FC.

For Cetus X ELRS 2.4G version, the Betaflight firmware 4.3.0 and up start to support BMI270 gyro. For Frsky D8 version, we recommend using BETAFPVF411RX 4.2.11 firmware and CLI dump file offered by BETAFPV.

The default flight controller firmware enables bidirectional D-shot and is compatible with Bluejay ESC firmware. If you update the 4.3.0 and up firmware for ELRS 2.4G from the Betaflight official site, please flash the CLI dump file for Cetus X.

The Bluejay firmware could support the BB51 hardware now. Both ELRS and Frsky boards are powered by BB51 hardware. If you want to setup the ESC specification, please use the BLHeliSuite16714902A_Beta or ESC-Configurator.

Recommended Parts

• Radio Transmitter: LiteRadio3, LiteRadio 2 SE
• Goggles: VR02 FPV Goggles
• Battery: BT2.0 450mAh 1S 30C Battery
• Props: Gemfan 2020 4-Blade Propellers

Package include

• 1 * Cetus X Brushless Quadcopter
• 1 * BT2.0 Battery Charger and Voltage Tester
• 2 * BT2.0 450mAh 1S 30C Battery
• 1 * Phillips Screwdriver
• 1 * Prop Removal Tool
• 1 * Type-C Adapter
• 4 * Gemfan 2020 4-Blades Props